Category Archives: concrete accessories

Coil rod and associated nuts and couplers for heavy duty wall forming. Available in ½”, ¾” and 1” Diameters in 12’ lengths. May be custom cut to length.

She-Bolts – ¾” x 17” Acme threaded to a ½” N.C. internally threaded end. Used in medium to heavy concrete construction where variable or larger wall thickness may be required. ½” N.C. rod determines final wall thickness. Reusable when proper grease is used. Subject to wear over prolonged usage so replacement is necessary after time.…

Plastic Rebar Chairs for placing rebar off grade as per plans. Available in the following heights: 1-1/2” to 2”, 2” to 2-1/2”, 3” to 3-1/2” and 4” to 4-1/2”. ½” height variation is attained by a simple 90 degree turn of the chair.

Used in steel reinforced plywood panel system

Standard Wedge bolt for use in steel ply panel forming system. Used in conjunction with X-Flat ties.

3” ID x 48” Galvanized Pipe – Schedule 40. Pipe is set into just poured concrete for light duty protection of mechanical equipment or other structures. (As seen on the left).

Used in conjunction with Plastic Foundation Vents to create void for airflow when vents are placed in a sub-grade application.

11ga galvanized twisted wire tie. Used in conjunction with 5/8” diameter steel rounds or rebar to secure ties to forms. Available for 6”, 8”, 10” and 12” walls.